Panasonic AW-HE40HWP Operating Instructions Manual page 16

Stand-alone installation
5
Check the mounting.
6
Connect the rear panel connectors.
●
How to secure the AC
adaptor cable
A Loosely secure the cable
clamp.
Cable clamp
Loosely secure the cable clamp
in the area shown above.
B Fasten the cable clamp.
Strap part
Take hold of the strap part, slide
the cable clamp until it stops
moving, and then secure it tightly.
Note
● Always disconnect the power supply before connecting or disconnecting cables.
Connecting or disconnecting cables while the power is turned on may result in malfunctions.
The unit is in the standby condition when the AC adaptor is connected.
The primary circuit is always "live" as long as the AC adaptor is connected to an electrical outlet.
16
(when the mount bracket is going to be used) (continued)
[AW-HE40H]
AC adaptor
LAN cable
cable
[AW-HE40S]
AC adaptor
LAN cable
cable
LAN cable
(for RS-422)
HDMI cable
RS-232C cable
LAN cable
(for RS-422)
SDI cable
RS-232C cable