Lateral Alignment Of The Thread Catcher - Pfaff 2483-980/31 Instruction Manual

13

Lateral alignment of the thread catcher

.06.02
Requirement
1. The tip of the thread catcher 5 must point exactly to the center of the needle.
2. The thread catcher 5 must be horizontal. It must not graze anything when it is operating.
Fig. 13 - 18
Remove knife 1 (screw 2).
Move needle bar to its BDC.
Loosen stop 3 (screws 4).
Position thread catcher 5 (screw 6) manually in front of the needle.
Align thread catcher 5 (screws 7) according to the requirements.
For further adjustments, leave knife 1 removed and stop 3 loosened.
2
5
6
6
3
Adjustment
1
5
13 - 21