Adjustment
13.
Thread wiper position
07.02
13 - 28
Requirement
Seen from the direction of sewing
1. The point of the thread wiper 5 must be approx. 1 - 1.5 mm to the right of the needle,
2. The thread wiper 5 must be approx. 2 mm in front of the needle in its foremost position.
4
Fig. 13 - 25
Slide bracket 1 (screw 2), without turning it, on the shaft according to requirement 1.
Turn rod 3 (nut 4) according to requirement 2.
3
2
1
5
1 - 1,5 mm
5
2 mm