Ird Troubleshooting; Antenna Gyro And Lnb Faults - KVH Industries TracVision G8 Owner's Manual

Type of Multiswitch Used
An active (not passive) multiswitch must always be used to
connect the TracVision G8 system to multiple IRDs. Refer to
Section 2.3, "Connecting the IRD(s)," on page 31
proper multiswitch/multiple IRD cabling.
4.3

IRD Troubleshooting

The IRD that was provided with your satellite television service
may also be the cause of less-than-ideal operation. First check the
IRD's configuration to ensure it is set up for the desired
programming. In the case of a faulty IRD, refer to your IRD user
manual for service and warranty information. If the IRD is both
configured properly and fully functional, contact your local KVH
dealer or service center for assistance.
4.4

Antenna Gyro and LNB Faults

Section 5, "Maintenance,"
authorized service personnel who may be required to replace one
of the antenna gyros or the LNB.
54-0198
for directions on
provides detailed instructions for
Troubleshooting
87