11. Clean or replace the forwarding, paper feed
and separation pulleys.
12. Install the separation and paper feed pulleys
to the primary paper feed unit.
13. Install the forwarding pulley to the forward-
ing pulley retainer.
When refitting the forwarding pulley, orient it
correctly as shown in Figure 1-5-8.
14. Refit the forwarding pulley retainer to the pri-
mary paper feed unit.
15. Refit the primary paper feed unit.
16. When the forwarding pulley, paper feed pul-
ley, separation pulley or the primary paper
feed unit is replaced, perform maintenance
mode U903 (clearing the jam counter) (see
page 1-3-146).
Machine front
Forwarding pulley
Figure 1-5-8
2JZ/2JX/2JV/2H7-1
Machine rear
1-5-5