Kyocera 300ci Service Manual page 137

Maintenance
item No.
Checking the operation of the finisher
U240
Description
Turns each motor and solenoid of 3000-sheet document finisher ON.
Purpose
To check the operation of each motor and solenoid of the 3000-sheet document finisher.
Method
1. Press the start key.
2. Select the item to be checked.
Display
FINISHER MOTOR
FINISHER SOL
MAIL BOX
BOOKLET
Method: [FINISHER MOTOR]
1. Select the item to be operated.
2. Press the start key. The operation starts.
Display
FEED IN MOTOR M
FEED IN MOTOR L
CONV MOTOR H
CONV MOTOR M
CONV MOTOR L
EJECT MOTOR H
EJECT MOTOR M
EJECT MOTOR L
SUB PATH MOTOR H
SUB PATH MOTOR M
BUNDLE UP MOTOR
BUNDLE DOWN MOTOR
WIDTH TEST(A3)
WIDTH TEST(LD)
STAPLE FR MOTOR
STAPLE S MOTOR
STAPLE MOTOR
TRAY MOTOR
PUNCH MOTOR
Description
Description
Checking the motor of the document finisher
Checking the solenoid of the document finisher
Checking the motor of the mailbox
Checking the motor of the center-folding unit
Motor
Paper entry motor (PEM) is turned on at middle speed
Paper entry motor (PEM) is turned on at low speed
Paper conveying motor (PCM) is turned on at high speed
Paper conveying motor (PCM) is turned on at middle speed
Paper conveying motor (PCM) is turned on at low speed
Eject motor (EJM) is turned on at high speed
Eject motor (EJM) is turned on at middle speed
Eject motor (EJM) is turned on at low speed
Relief path motor (RPM) is turned on counterclockwise
Relief path motor (RPM) is turned on clockrwise
Paper conveying belt motor 1 (PCBM1) is turned on
Paper conveying belt motor 2 (PCBM2) is turned on
Side registration motor 1/2 (SRM1/2) are turned on
Side registration motor 1/2 (SRM1/2) are turned on
Staple moving motor 1 (STMM1) is turned on
Staple moving motor 2 (STMM2) is turned on
Staple motor (STM) is turned on
Main tray motor (MTM) is turned on
Punch motor (PUNM) is turned on
2JZ/2JX/2JV/2H7-5
1-3-91