Kyocera 300ci Service Manual page 136

2JZ/2JX/2JV/2H7-5
Maintenance
item No.
Setting punch destination
U234
Description
Sets the destination of punch unit of 3000-sheet document finisher.
Purpose
To be set when installing a different punch unit from the destination of the machine.
Setting
1. Press the start key.
2. Select the destination.
Display
AUTO
JAPAN METRIC
INCH
EUROPE METRIC
Initial setting: INCH (Inch specifications)/EUROPE METRIC (Metric specifications)
3. Press the start key. The setting is set.
4. Turn the main power switch off and on.
Setting finisher stack quantity
U237
Description
Sets the number of sheets of each stack on the main tray and on the Inner tray in 3000-sheet document fin-
isher.
Purpose
To change the setting when a stack malfunction has occurred.
Method
1. Press the start key.
2. Select the item to be set.
Display
MAIN TRAY
MIDDLE TRAY
Setting: [MAIN TRAY]
1. Change the setting using the +/- or numeric keys.
Setting value
0
1
Initial setting: 0
2. Press the start key. The setting is set.
3. Turn the main power switch off and on.
Setting: [MIDDLE TRAY]
1. Change the setting using the +/- or numeric keys.
Setting value
0
1
Initial setting: 0
Number of sheets of stack on the internal tray for non-staple copying: 10 sheets
2. Press the start key. The setting is set.
3. Turn the main power switch off and on.
1-3-90
Description
Description
With no punch unit
Metric (Japan) specifications
Inch (North America) specifications
Metric (Europe) specifications
Description
Number of sheets of stack on the main tray
Number of sheets of stack on the internal tray for staple mode
Description
Number of sheets of stack on the main tray: 3000 sheets
Number of sheets of stack on the main tray: 1500 sheets
Description
Number of sheets of stack on the internal tray for staple mode: 50 sheets
Number of sheets of stack on the internal tray for staple mode: 30 sheets