Adjusting The Rider Backrest - Yamaha TMax XP500 Owner's Manual

To close the seat
1. Fold the seat down, and then
push it down to lock it in place.
2. Remove the key from the main
switch if the scooter will be left
unattended.
NOTE:
Make sure that the seat is properly
secured before riding.
Ofrecido por www.electromanuales.com
INSTRUMENT AND CONTROL FUNCTIONS
1. Rider backrest

Adjusting the rider backrest

The rider backrest can be adjusted to
the three different positions shown.
Adjust the backrest as follows.
1
1. Rider backrest
2. Bolt (×2)
EAU03880
Rider backrest, adjusting
3-12
1
1. Open the seat. (See page 3-11
for seat opening and closing pro-
cedures.)
2. Remove the backrest bolts.
3. Slide the backrest forward or
backward to the desired position.
4. Install and securely tighten the
backrest bolts.
5. Close the seat.
3
2