Ignition Circuit Cut-Off System - Yamaha TMax XP500 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
w
The scooter must not be ridden
with the sidestand down, or if the
sidestand cannot
moved up (or does not stay up),
otherwise the sidestand could con-
tact the ground and distract the
3
operator, resulting in a possible
loss of control. Yamaha's ignition
circuit cut-off system has been
designed to assist the operator in
fulfilling the responsibility of rais-
ing the sidestand before starting
off. Therefore, check this system
regularly as described below and
have a Yamaha dealer repair it if it
does not function properly.
Ofrecido por www.electromanuales.com
EW000044
Ignition circuit cut-off
system
The ignition circuit cut-off system
(comprising the sidestand switch and
be properly
brake light switches) has the follow-
ing functions.
8 It prevents starting when the
sidestand is up, but neither brake
is applied.
8 It prevents starting when either
brake is applied, but the side-
stand is still down.
8 It cuts the running engine when
the sidestand is moved down.
Periodically check the operation of
the ignition circuit cut-off system
according to the following procedure.
w
If a malfunction is noted, have a
Yamaha dealer check the system
before riding.
EAU00337
Ignition circuit cut-off system
EW000045
3-15