Yamaha TMax XP500 Owner's Manual page 61

4. Install the chain drive oil drain
bolt, and then tighten it to the
specified torque.
Tightening torque:
Chain drive oil drain bolt:
20 Nm (2.0 m·kgf)
5. Add the specified amount of the
recommended oil.
Recommended chain drive oil:
See page 8-1.
Oil quantity:
0.7 L
6. Wipe the dipstick clean, insert it
into the oil filler hole (without
screwing it in), and then remove
it to check the oil level.
Ofrecido por www.electromanuales.com
PERIODIC MAINTENANCE AND MINOR REPAIR
1. Maximum level mark
2. Minimum level mark
NOTE:
The engine oil should be between the
minimum and maximum level marks.
7. If the engine oil is below the min-
imum level mark, add sufficient
oil of the recommended type to
raise it to the correct level.
8. Insert the dipstick into the oil filler
hole, and then tighten the oil filler
cap.
cC
Make sure that no foreign material
enters the chain drive case.
1
2
6-16
ECA00078
6