Fuel Tank Overflow Hose; Catalytic Converter; Adjusting The Rider Backrest - Yamaha TMAX XP560 Manual

Instrument and control functions

Fuel tank overflow hose

1. Fuel tank overflow hose
6
Before operating the vehicle:
 Check the fuel tank overflow hose
connection.
 Check the fuel tank overflow hose
for cracks or damage, and replace
it if necessary.
 Make sure that the end of the fuel
tank overflow hose is not blocked,
and clean it if necessary.
 Make sure that the end of the fuel
tank overflow hose is positioned
as shown.
TIP
See page 9-12 for canister information.
EAU80201

Catalytic converter

The exhaust system contains catalytic
converter(s) to reduce harmful exhaust
emissions.
WARNING
The exhaust system is hot after op-
eration. To prevent a fire hazard or
burns:
1
 Do not park the vehicle near
possible fire hazards such as
grass or other materials that
easily burn.
 Park the vehicle in a place
where pedestrians or children
are not likely to touch the hot
exhaust system.
 Make sure that the exhaust sys-
tem has cooled down before
doing any maintenance work.
 Do not allow the engine to idle
more than a few minutes. Long
idling can cause a build-up of
heat.
EAU13435

Adjusting the rider backrest

The rider backrest can be adjusted to
three
ward/mid/back).
EWA10863 Adjust the backrest as follows:
1. Open the seat. (See page 4-12.)
2. Hold down the lever and slide it
1. Lever
6-32
different positions
forward or backward.
1
EAU95991
(for-