Yamaha TMax XP500 Owner's Manual page 24

Hide thumbs Also See for TMax XP500:
Table of Contents

Advertisement

INSTRUMENT AND CONTROL FUNCTIONS
1
2
3
3
4
1. Pass switch "PASS"
2. Dimmer switch "&/%"
3. Turn signal switch "4/6"
4. Horn switch "*"
Turn signal switch "4/6"
To signal a right-hand turn, push this
switch to "6". To signal a left-hand
turn, push this switch to "4". When
released, the switch returns to the
center position. To cancel the turn
signal lights, push the switch in after
it has returned to the center position.
Horn switch "*"
Press this switch to sound the horn.
Ofrecido por www.electromanuales.com
1. Engine stop switch "#/$"
2. Hazard switch "0"
3. Start switch ","
Engine stop switch "#/$"
EAU03889
Set this switch to "#" before starting
Turn
signal
switch
the engine. Set this switch to "$" to
stop the engine in case of an emer-
gency, such as when the scooter
overturns or when the throttle cable is
stuck.
EAU00129
Horn
switch
Hazard switch "0"
1
With the key in the "ON" or "
tion, use this switch to turn on the
2
hazard light (simultaneous flashing of
all turn signal lights).
3
The hazard light is used in case of an
emergency or to warn other drivers
when your scooter is stopped where
it might be a traffic hazard.
cC
EAU03890
Engine
stop
switch
Do not use the hazard light for an
extended length of time, otherwise
the battery may discharge.
Start switch ","
With the sidestand up, push this
switch while applying the front or rear
brake to crank the engine with the
starter.
cC
See page 5-1 for starting instruc-
tions prior to starting the engine.
3-7
EAU03826
Hazard
switch
.
" posi-
EC000006
EAU03801
Start
switch
EC000005

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents