Yamaha TMax XP500 Owner's Manual page 20

INSTRUMENT AND CONTROL FUNCTIONS
NOTE:
The oil change indicator light may
flash when the engine is revved with
the scooter on the centerstand, but
this does not indicate a malfunction.
3
Ofrecido por www.electromanuales.com
1 2 3
1. Oil change indicator light "
2. V-belt replacement indicator light "V-BELT"
3. High beam indicator light "&"
4. Turn signal indicator lights "4" and "6"
V-belt replacement indicator light
"V-BELT"
This indicator light comes on every
20,000 km when the V-belt needs to
be replaced.
The electrical circuit of the indicator
light can be checked according to the
following procedure.
1. Turn the key to "ON" and make
sure that the engine stop switch
is set to "#".
2. If the indicator light does not
come on, have a Yamaha dealer
check the electrical circuit.
4
High beam indicator light "&"
This indicator light comes on when
the high beam of the headlight is
switched on.
Turn signal indicator lights "4"
and "6"
The corresponding indicator light
flashes when the turn signal switch is
"
7
pushed to the left or right.
EAU04424
V-belt replacement indicator light
3-3
EAU00063
High beam indicator light
EAU04121
Turn signal indicator lights