Table of Contents
Advertisement
4.9
COMMUNICATOR ENABLED REPORTS
PURPOSE:
For confi guring the Console condition reporting options.
USER RESPONSE:
ENABLED REPORTS
✦ Check the ALL TROUBLE REPORTING box to have the Console's
communicator send all status reports to the central station. These
include the Console low battery, sensor supervisory, sensor
low battery, and when the Activity Timer is turned on or off.
✦ Check AC POWER FAIL STATUS REPORTING if communication
of loss and restoration of AC power is desired.
AUTOMATIC TEST REPORT
✦ Click arrow on AUTOMATIC TEST REPORT INTERVAL and select 1,
7, 30 days or disabled for the Console automatic test report.
☞ NOTE: The fi rst 30-day status report will occur 30 days plus
12 hours from the time the Console is programmed.
✦ Check the FULLY AUTOMATIC SYSTEM TEST box to have test
reports occur at the set interval only when all Console
conditions are OK. If any sensor has a supervisory
condition, or the Console has any form of trouble (low
backup battery, no AC) the test report will not be sent.
25
Advertisement
Table of Contents
