Program Installation - Linear RA-2400 Reference Manual For Programming

1.4

PROGRAM INSTALLATION

The RA-2400 Remote Access Program software is supplied on a
CD-ROM. The latest version of the software is also available on Linear's
web site at: www.linearcorp.com. The installation program will create
a directory on your hard disk drive. Be sure that you have at least 10
megabytes free on the hard disk for the program and any Account
Profi le fi les that you create.
To Install the Remote Access Program:
✦ The fi rst step is to close all other running programs.
✦ Place the Remote Access CD into your computer CD-ROM drive.
✦ The installation process should start automatically. If
the CD does not auto run, click START, then RUN... and
browse to fi nd RASETUP.EXE on the CD. Double-click
on RASETUP.EXE and the install program will start.
✦ Click the Next button to install the Remote Access software.
Follow the on-screen instructions as the setup program creates
the directory and copies the program fi les onto your hard disk.
A Remote Access icon will be created on your desktop.
✦ If you are performing a reinstallation, or an update, you will
be prompted to uninstall RA-2400 fi rst. After the uninstall is
completed, browse to the appropriate drive letter for your CD
drive and double-click on RASETUP.EXE. Then follow the
on-screen steps to install the Remote Access software.
☞ NOTE: If Windows asks whether to replace existing .DLL
fi les, fi rst answer NO. If RA-2400 fails to run, re-install
RA-2400 and answer YES to replace existing .DLL fi les.
✦ Remove the CD and store it in a safe place.
To Remove the Remote Access Program:
✦ Press START, SETTINGS, CONTROL PANEL.
Double-click on ADD/REMOVE PROGRAMS.
✦ Select Linear RA-2400 and click ADD/REMOVE or CHANGE/
REMOVE button depending on your Windows Operating system.
4