Communicator Enabled Reports - Linear PERS-2400 PERSONAL EMERGENCY REPORTING SYSTEM RA-2400 Programming Manual

Ra-2400 remote access software program for personal emergency reporting system

Hide thumbs Also See for PERS-2400 PERSONAL EMERGENCY REPORTING SYSTEM RA-2400:

Table of Contents

4.8

COMMUNICATOR ENABLED REPORTS

PURPOSE:

For configuring the Console's communicator status reporting options.

USER RESPONSE:

ENABLED REPORTS

Check the ALL TROUBLE REPORTING box to have the Console's

communicator send all status reports to the central station. These

include the Console low battery, sensor supervisory, sensor low

battery, and when the Activity Timer is turned on or off.

Check AC POWER FAIL STATUS REPORTING if communication

of loss and restoration of AC power is desired (not supported in

Versions 1.0 to 1.4).

Click arrow on AUTOMATIC TEST REPORT INTERVAL and

select 1, 7 or 30 days if console automatic test reporting is desired

(Versions 1.0 to 1.4 only support 30 days or disabled).

NOTE: The first 30-day status report will occur 30 days plus 12 hours

from the time the Console is programmed.

Table of Contents