Console Remote Audio Password - Linear RA-2400 Reference Manual For Programming

4.3

CONSOLE REMOTE AUDIO PASSWORD

PURPOSE:
For setting the Remote Audio Communications password. This is the
code a caller will need to enter using the telephone keypad to establish
voice communications with the Console.
USER RESPONSE:
✦ Enter a four-digit code in the REMOTE AUDIO PASSWORD
fi eld (the factory default code is 1234).
MAKING A REMOTE AUDIO CALL
To establish remote audio communications with the Console:
1. Dial the number of the phone line that the Console is
connected to, allow it to ring three times, then hang up
2. Wait about 10 seconds, then call the Console a second time
3. When the Console answers, a tone will sound for about 8 seconds
4. When the tone ends, enter the Remote Audio
Password (default 1234) followed by the # key
The console will begin audio communications (2-way duplex, 2-way
manual, or listen-only) depending on the Console's programming (see
Section 4.5)
☞ NOTE: If the Console audio is set to "none" Remote
Audio Communications will not function
18