Linear RA-2400 Reference Manual For Programming page 44

6.3 CONNECTING TO A CONSOLE (CONTINUED)
CONNECTING LOCALLY
✦ Verify that the modem's LINE jack is connected to the Console's
LINE jack with a double-ended modular telephone cable.
✦ Verify that the Console is in Test Mode.
✦ Click the CONNECT button. The Communication Status area will show
the progress of the connection. WAIT UNTIL THE TIMEOUT
TIMER BEGINS TO COUNT DOWN BEFORE PROCEEDING.
✦ As the timeout timer counts down, PRESS THE
HELP BUTTON ON THE CONSOLE.
CONNECTING REMOTELY
✦ Be sure that the modem's LINE jack is
connected to a working telephone line.
✦ Verify that the Console's LINE jack is connected
to a working telephone line.
✦ Click the CONNECT button. The Communications Status area
will show the progress of the connection. WAIT FOR THE
CONNECTION TO COMPLETE. The RA-2400 will dial the
number once, wait for a few rings, hang-up, then dial a second
time. The Console should answer the telephone immediately
when the telephone rings during the second dialing attempt.
After connecting the Communications Status area will show the progress
of the on-line connection, then display "Connected" and the Console's
version number.
The Console Power area will show the status of the Console's AC power
and backup battery. Pressing the REFRESH button will update the
displayed information.
Local Connection in Progress Local Connection in Progress
42
Remote Connection in Progress Remote Connection in Progress