Table of Contents
Advertisement
4.6
SENSORS
PURPOSE:
To display and edit sensors installed in the Console's memory. Up to 16
sensors may be installed, each with its own type, restore and supervision
options. The status of the sensor selected is also displayed.
☞ NOTE: To display and edit sensors installed in the
Console, the sensor data must fi rst be received
from the Console (see Section 6.7).
USER RESPONSE:
SENSOR TYPE
✦ Click on the sensor number in the menu tree to view it.
✦ View or edit the SENSOR TYPE.
The sensor type options are:
NOT INSTALLED: No sensor has been stored in this sensor location. Also can be used to
remove a sensor from the Console's memory. Sensors cannot be added with this menu.
FIRE: Sensor will trigger the fi re siren and report the fi re code to the Central Station.
ACTIVITY RESET: Sensor will reset the Activity Timer, preventing an inactivity report.
EMERGENCY (1 BUTTON): Sensor is a one-button transmitter that will trigger the emergency
siren and report the emergency code to the Central Station. NOTE: MODEL DXS-63 TWO-
BUTTON TRANSMITTERS ARE SINGLE-CHANNEL DEVICES AND SHOULD BE SET TO
THIS OPTION.
EMERGENCY (2 BUTTON): Sensor is a two-button transmitter. Both buttons must be pressed
to trigger the emergency siren and report the emergency code to the Central Station.
21
Advertisement
Table of Contents
