Sensors - Linear PERS-2400 PERSONAL EMERGENCY REPORTING SYSTEM RA-2400 Programming Manual

4.5

SENSORS

PURPOSE:
To display and edit sensors installed in the Console's memory. Up to 16
sensors may be installed, each with its own type, restore and supervision
options. The status of the sensor selected is also displayed.
NOTE: To display and edit sensors installed in the Console, the
sensor data must first be received from the Console (see Section 5.4).
USER RESPONSE:
SENSOR TYPE
!
Click on the sensor in the menu tree to view it.
!
View or edit the SENSOR TYPE.
The sensor type options are:
NOT INSTALLED
No sensor has been stored in this sensor location. Also can be used to remove a sensor
from the Console's memory.
FIRE
Sensor will trigger the fire siren and report the fire code to the Central Station.
ACTIVITY RESET
Sensor will reset the Activity Timer, preventing an inactivity report.
EMERGENCY (1 BUTTON)
Sensor is a one-button transmitter that will trigger the emergency siren and report the
emergency code to the Central Station. NOTE: 2-button Model DXS-63's are special
and should be set to this option.
EMERGENCY (2 BUTTON)
Sensor is a two-button transmitter. Both buttons must be pressed to trigger the
emergency siren and report the emergency code to the Central Station.
20
SENSOR
TYPE