Trouble Shooting Guide - Jackson 100 B/PRB Service Manual

TROUBLE SHOOTING GUIDE

PROBLEM
Nothing on machine
operates.
Will not fill with electrical
power applied even though
other components work.
(B Model)
Will not fill with electrical
power applied even though
other components work
(PRB Model)
CAUSE
1- No Voltage to dishwasher,
a. Customer's fuse blown or
circuit breaker tripped.
2- Machine circuit breaker
tripped or turned off.
3- Voltage to machine low or
circuit to machine broken.
1- Water hand valve off.
2- Master switch not on or
faulty.
3- Fill switch faulty or loose
wire connection.
4- Solenoid valve does not
operate.
5- Water level control faulty
6- Y strainer clogged.
1- Customer's water hand
valve off.
2- Master switch not on or
faulty.
3- Fill switch faulty or loose
wire connection.
4- Rinse motor not operating.
5- Water level control does not
maintain the water level in the
rinse tank.
6- Solenoid Valve does not
operate
7- Y-strainer clogged.
30
SOLUTION
a. Replace or reset.
2- Turn on or reset.
3- Contact your electrician
and/or power company for
repair.
1- Turn hand valve on.
2- Turn on or replace.
3- Replace switch or wire or
connection terminal.
4- See instruction page
concerning the Solenoid
valve.
5- See page on water.
6- Turn water to machine
off, remove plug & strainer
screen, clean & replace.
1-Tum hand valve on.
2- Turn on or replace.
3- Replace switch or wire or
connection terminal.
4- Check connection and
voltage to motor repair or
replace as necessary.
5- See instruction page
concerning the water level
control for PRB Models.
6- See instruction page con-
cerning Solenoid Valve.
7- Turn off water to machine,
remove plug. prepare to
catch hot water & strainer
screen, clean & replace.