Table of Contents
Advertisement
Quick Links
INSTALLATION & OPERATION MANUAL
February 24, 2004
P/N 7610-100-01-00 (Revision E)
10 SERIES, ELECTRICALLY HEATED, ROUND DISHMACHINES
FOR JACKSON MODELS:
10A
10AB
10APRB
10U
HIGHER HOOD OPTION
An
Company
BARBOURVILLE, KY. 40906
Jackson MSC, INC.
P.O. BOX 1060
HWY. 25E
FAX (606) 523-9196
PHONE (606) 523-9795
www.jacksonmsc.com
Advertisement
Table of Contents
Related Manuals for Jackson 10U
Summary of Contents for Jackson 10U
- Page 1 INSTALLATION & OPERATION MANUAL February 24, 2004 P/N 7610-100-01-00 (Revision E) 10 SERIES, ELECTRICALLY HEATED, ROUND DISHMACHINES FOR JACKSON MODELS: 10AB 10APRB HIGHER HOOD OPTION Company Jackson MSC, INC. P.O. BOX 1060 HWY. 25E BARBOURVILLE, KY. 40906 FAX (606) 523-9196 PHONE (606) 523-9795 www.jacksonmsc.com...
- Page 2 The warranty registration card supplied with the machine must be returned to Jackson MSC within 30 days to validate the warranty. REPLACEMENT PARTS WARRANTY Jackson replacement parts are warranted for a period of 90 days from the date of installation or 180 days from the date of shipment from the factory, which ever occurs first.
- Page 3 REVISION MADE APPLICABLE REVISION DETAILS DATE ADDED 10U PHOTO INSTALLATION GUIDE AND ALL 10U 02-24-04 INFORMATION...
- Page 4 10APRB = 10 with a booster tank and a power rinse pump 10U = 10 with a booster tank, a 4” shorter hood, and 9” shorter legs Higher Hood Option = A hood that is 5” higher than the standard hood Model: Serial No.:...
-
Page 5: Table Of Contents
10A 208 - 220 V, 60 HZ, single phase 10AB 208 - 220 V, 60 HZ, single phase 10AB/10U 208 - 220 V, 60 HZ, three phase 10AB/APRB/10U 208 - 220 V, 60 HZ, single phase 10AB/APRB/10U 208 - 220 V, 60 HZ, three phase... -
Page 6: Specification Information
SECTION 1: SPECIFICATION INFORMATION... - Page 7 DISHES PER HOUR GLASSES PER HOUR OPERATING CYCLE (SECONDS) WASH TIME RINSE TIME TOTAL CYCLE TIME TANK CAPACITY (GALLONS) WASH TANK BOOSTER TANK (10AB/10APRB/10U ONLY) PUMP CAPACITY (GALLONS) WASH PUMP TEMPERATURES WASH---°F (MINIMUM) RINSE---°F (MINIMUM) SECTION 1: SPECIFICATION INFORMATION ELECTRICAL REQUIREMENTS...
-
Page 8: 10A Dimensions
SECTION 1: SPECIFICATION INFORMATION NOTES: A - Water inlet 1/2” NPT. Plumbing can be directed either left or right. B - Drain connection 1 1/2” NPT C - Electrical connection D - Clearance for dishes: 10” (10A 4” shorter hood) 14”... -
Page 9: 10Ab/10Aprb/10U Dimensions
E - Power rinse pump motor (10APRB only) F - Booster tank (10AB/10APRB/10U only) G - Machine height: 45 1/2” (10U/10AB/10APRB, 9” shorter leg, 4” shorter hood) 58 1/4” (10AB/10APRB standard leg & hood) 63 1/4” (10AB/10APRB, standard leg, 5” higher hood) All dimensions in inches. - Page 10 SECTION 1: SPECIFICATION INFORMATION 10 SERIES TABLE DIMENSIONS Legend A - 10” High backsplash, 2” turnback at 45B B - 3” High, 1 1/2” diameter rolled edge C - Scrap block D - Scrap basket with slide bars E - 20” x 20” x 5” deep pre-rinse sink F - Heavy duty pre-rinse G - 20”...
-
Page 11: Installation/Operation Instructions
SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS... -
Page 12: Visual Inspection/Unpacking The Dishmachine
INSTALLATION INSTRUCTIONS Jackson MSC Inc. provides technical support for all of the dishmachines detailed in this manual. We strongly recommend that you refer to this manual before making a call to our technical support staff. Please have this manual with you when you call so that our staff can refer you, if necessary, to the proper page. - Page 13 SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS INSTALLATION INSTRUCTIONS LEVEL THE DISHMACHINE: The dishmachine is designed to operate while being level. This is important to prevent any damage to the machine during operation and to ensure the best results when washing ware. The unit comes with adjustable bullet feet, which can be turned using a pair of channel locks or by hand if the unit can be raised safely.
- Page 14 SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS ALIGNING THE MACHINE: Adjust the machine base to line up hole in table with hole in support block (Fig. 11). INSTALLING THE INTERNAL VACUUM BREAKER: Insert internal vacuum breaker pipe into hood support block pin end down (Fig.12). WARNING: Internal vacuum breaker pipe must be installed or there will be a hazard to the operator.
- Page 15 SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS INSTALLATION INSTRUCTIONS PLUMBING THE DISHMACHINE: All plumbing connections must comply with all applicable local, state, and national plumb- ing codes. The plumber is responsible for ensuring that the incoming water line is thoroughly flushed prior to connecting it to any component of the dishmachine.
-
Page 16: Final Check
SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS INSTALLATION INSTRUCTIONS FINAL CHECK: Check all fittings and connections before and after first 10 cycles. Deliver Installation/Operation Manual to site manager. Contact Jackson for free performance and installation check. -
Page 17: Operation Instructions
SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS OPERATION INSTRUCTIONS PREPARATION: 1. Ensure that the pump intake strainer (1) and basket overflow strainer (2) are inserted and tight. 2. Ensure that the wash and rinse arms are installed and secure. 3. Remove all solid wastes in order to avoid obstructing filters, drain and wash and rinse arms. -
Page 18: Detergent Control
If the water cannot get hot enough, your results may not be satisfactory. This is why Jackson recommends that if you have installed the machine in an area with hard water, that you also install some type of water treatment equipment to help remove the dissolved solids from the water before it gets to the dishmachine. -
Page 19: Preventative Maintenance
SECTION 3: PREVENTATIVE MAINTENANCE... - Page 20 SECTION 3: PREVENTATIVE MAINTENANCE Proper maintenance of your Jackson dishmachine will insure optimum service with a minimum of down time. 1. To delime the booster tank. a. Remove the support pipe nut and lift the whole hood assembly away from the unit.
-
Page 21: Electrical Schematics
SECTION 4: ELECTRICAL SCHEMATICS... - Page 22 BOARD #1 CUSTOMER SERVICE 6900 WATTS 10A 208/220V 1 PHASE CIRCUIT BREAKER 15 AMP RATING ½ HP 5.3 AMPS 10AB/10U 208/220V 1 PHASE RINSE HEATERS CIRCUIT BREAKER 15 AMP RATING ½ HP 5.3 AMPS 10AB/10U 208/220V 3 PHASE WASH MOTOR...
-
Page 23: Wiring Diagrams
SECTION 4: ELECTRICAL SCHEMATICS 10A WIRING DIAGRAM (208-230 VOLT, 60HZ, SINGLE PHASE) - Page 24 SECTION 4: ELECTRICAL SCHEMATICS 10AB WIRING DIAGRAM (208-230 VOLT, 60HZ, SINGLE PHASE) 9905-000-54-97...
- Page 25 SECTION 4: ELECTRICAL SCHEMATICS 10AB WIRING DIAGRAM (208-230 VOLT, 60HZ, THREE PHASE) 9905-002-55-90a...
- Page 26 SECTION 4: ELECTRICAL SCHEMATICS 10APRB WIRING DIAGRAM (208-230 VOLT, 60HZ, SINGLE PHASE) 9905-002-55-91a...
- Page 27 SECTION 4: ELECTRICAL SCHEMATICS 10APRB WIRING DIAGRAM (208-230 VOLT, 60HZ, THREE PHASE) 9905-002-55-92a...
-
Page 28: Jackson Maintenance & Repair Centers
SECTION 5: JACKSON MAINTENANCE & REPAIR CENTERS... - Page 29 FAX: (901) 366-4588 3000 S. WYANDOT ST. ENGLEWOOD, CO 80110 (303) 781-5548 (800) 624-2117 FAX: (303) 761-8861 SECTION 5: JACKSON MAINTENANCE & REPAIR CENTERS COLORADO (cont.): FLORIDA (cont.): METRO APPLIANCE SERVICE GCS SERVICE INC 1640 S BROADWAY 3373 N. W. 168TH STREET...
- Page 30 SECTION 5: JACKSON MAINTENANCE & REPAIR CENTERS IDAHO: IOWA (cont.): RON'S SERVICE CONES REPAIR SVC. 703 E 44TH STREET STE 10 1056 27TH AVENUE SW GARDEN CITY, ID 83714 CEDAR RAPIDS, IA 52404 (208) 375-4073 (319) 365-3325 FAX: (208) 375-4402...
- Page 31 817 N. THIRD STREET FAX: (402) 397-2881 PHILADELPHIA, PA 19123 goodwintuc@aol.com (215) 925-6217 800-441-9115 FAX: (215) 925-6208 SECTION 5: JACKSON MAINTENANCE & REPAIR CENTERS NEW JERSEY (cont.): NEW YORK (cont.): ELMER SCHULTZ SERVICES JACKSON FASPRAY SVC. 201 WASHINGTON AVE. 155 SARGEANT AVE.
- Page 32 SECTION 5: JACKSON MAINTENANCE & REPAIR CENTERS NORTH CAROLINA (cont.): OHIO (cont.): AUTHORIZED APPLIANCE GCS SERVICE INC. SERVICE CENTER 2830 JOHNSTON RD. 109 HINTON AVE. COLUMBUS, OH 43219 WILMINGTON, NC 28403 (614) 476-3225 (910) 313-1250 800-282-5406 FAX: (910) 313-6130 FAX: (614) 476-1196...
- Page 33 GCS SERVICE INC. ascmil@execpc.com 180 SECOND STREET CHELSEA, MA 02150 (617)889-9393 800-225-1155 FAX: (617) 889-1222 SECTION 5: JACKSON MAINTENANCE & REPAIR CENTERS WISCONSIN (cont.): APPLIANCE SERVICE CENTER 786 MORRIS AVE GREEN BAY, WI 54304 (920) 496-9993 800-236-0871 FAX: (920) 496-9927 ascfox@execpc.com...