Printer Features Settings - Ricoh SP 112SF User Manual

Printer Features Settings

I/O Timeout
Timeout: USB
Specifies how many seconds the machine waits for print data and if the data is interrupted
while being sent from the computer via USB. If the machine does not receive any data within
the specified time, the machine only prints the data it has received.
Default: [60 sec.]
• Off
• 15 sec.
• 60 sec.
• 300 sec.
Auto Continue
Sets the machine to ignore errors on paper size or type and continue printing. The printing stops
temporarily if an error is detected, and resumes automatically after the specified time depending on
the settings specified in the control panel. If [Auto Continue] is set to [0 sec.], the machine continues
printing and does not display the error message.
Default: [0 sec.]
• Off
• 0 sec.
• 10 sec.
• 30 sec.
Sub Paper Size
Sets the machine to print onto paper of another size if the specified paper is not loaded in tray.
Alternative sizes are preset to A4 and Letter.
Default: [On]
• On
• Off
Printer Features Settings
113