When The Machine Does Not Operate Properly; General - Lanier 5635 Operator's Manual

When the Machine Does Not Operate Properly

When the Machine Does Not Operate Properly

General

Machine Status
Please wait
Cannot detect original size.
Check original orientation.
Check paper size.
Rotate Sort is not available with
this image size.
Cannot punch paper of this size.
It is over stapling capacity.
Hole punch receptacle is full.
Open the door as shown and
empty receptical.
Cannot staple paper of this size.
Duplex is not available with this
size paper.
Maximum number of sets is *
9 - 22
Problem/Cause
A message appears when you
turn on the Operatorion key or
change the toner bottle.
Improper original is set
Original is not set.
There is no copy paper that is in
the same direction as the
original.
Improper paper size is set.
The size of paper for which no
rotate-sorting is abailable is
selected.
The punch function cannot be
used for the paper size selected.
The number of sheets per set is
over the staple capacity.
Chad receptacal is full.
The Staple function cannot be
used for the paper size selected.
A paper size in duplex mode is
not available.
The number of copies exceeds
the maximum copy quantity.
Action
Wait for the machine.
SSet custom size original onthe
exposure glass
Input the horizontal and vertical
size of the custom original.
Select paper manually, not in
Auto Paper Select mode.
Do not use Auto Reduce/Enlarge
mode/
Set your originals.
Set teh original in the dame
direction as the copy paper.
If you press the Start key, copy
job starts.
Select theproper size.
The following paper sizes are
available for punch mode.
•
Ledger,
•
Legal
Check the staple capacity.
Check the chad waste box and
remove the chad.
Select the proper paper size that
can be used in staple mode.
Select a paper size that can be
used in duplex mode.
The following paper sizes are
available for duplex mode.
•
A3,B4,A4,B5,A5
Service and Supplies