Control Panel - Lanier 5635 Operator's Manual

Control Panel

1
2
20 19 18
1
Screen Contrast knob
Adjust the brightness of the Display Panel.
2
User Tools/Counter key
User Tools: Press to change the default settings and
conditions to meet your requirements.
Counter: Press the check or print the total number of copies
made.
3
Display Panel
Displays operation status, error messages, and function
menus.
4
Check Mode key
Press to review the copy settings
5
Program key
Press to store copy settings.
6
Clear Modes key
Press to clear the previous entered copy mode settings.
7
Energy Saver key
Press to switch to and from Energy Saver mode.
Component Identification
3
8
Interrupt key
Press to interrupt a copy job to run another copy job.
9
Main Power indicator
This indicator goes on when the main power switch is turned
on, and goes off when the sitch is turned off.
10
Operation switch
Press this switch to turn the power on. To turn thepower off,
press this switch again.
11
Sample Copy key
Use this key to make a single sample copy before starting a
long copy run. Check the sample copy and making any
necessary changes to the image quality settings before you
begin making multiple copies. This saves time and supplies.
12
Start key
Press to start copying, scannig, or printing.
13
Clear/Stop key
Clear: delets one digit when entering numbers.
Stop: Interrupts the current operation.
14
# key
Used as the Enter key.
4 5 6 7 8
17 16 15 14 13 12 11 10
9
2 - 1