Troubleshooting; If Your Machine Does Not Operate As You Want; When A Message Is Displayed - Lanier LD 035 Operator's Manual

Copy reference
Table of Contents

Advertisement

AdonisC3_GBcopyF_FM1.book Page 77 Thursday, November 28, 2002 1:53 PM
If Your Machine Does Not Operate As You
Want

When a Message Is Displayed

The following chart contains explanations for the common messages. If other
messages appear, follow the instructions as they are displayed.
Note
❒ For messages that are not listed here, see General Settings Guide.
Message
Cannot detect original size. Improper original is
Check original orientation.
Check paper size.
Rotate Sort is not available
with this image size.
Cannot punch paper of this
size.
It is over stapling capacity.
Cannot staple paper of this
size.
Duplex is not avilable with
this paper size.

3. Troubleshooting

Causes
placed. See p.9 "Sizes diffi-
cult to detect".
Original is not placed.
Original is not placed in a
proper orientation.
Improper paper size is set.
A size of paper for which
Rotate Sort is not available
is selected.
The Punch function cannot
be used with paper size se-
lected.
The number of sheets per
set is over the staple capac-
ity.
The Staple function cannot
be used with paper size se-
lected.
A paper size not available
in Duplex mode has been
selected.
Solutions
Select paper manually, not in Auto
Paper Select mode, and do not use
Auto Reduce/Enlarge function.
Place the original on the exposure
glass. See p.11 "Placing Originals on
the Exposure Glass" .
Place your originals.
Change the orientation of the origi-
nal.
If you press the { { { { Start} } } } key, copy
will start onto the selected paper.
Select the proper paper size. See
p.31 "Sort".
The following paper sizes are avail-
able for Punch mode: A3L, B4
JISL, A4KL, B5 JISKL, A5KL,
11" × 17"L, 8
" × 14"L and 5
1
/
2
1
8
/
"KL. Select one of these sizes.
2
Check the stapler capacity. See p.108
"Staple".
Select a paper size that can be used
in Staple mode. See p.108 "Staple".
The following paper sizes are avail-
able for Duplex mode: A3L, B4
JISL, A4KL, B5 JISKL, A5L.
Select one of these sizes.
" ×
1
/
2
77

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ld045

Table of Contents