When The Machine Does Not Operate Properly; Message; Display - Lanier 5515 Operator's Manual

When the Machine Does Not Operate Properly

When the Machine Does Not Operate Properly

Message

Machine Status
Please wait
Cannot detect original size.
Check original orientation.
Check paper size.
You cannot enter the desired
copy set number.
The machine instructs you to
set the key counter.

Display

Problem
The display panel is off.
Nothing happens when the
operation switch is turned on.
6 - 10
Problem/Cause
The machine is warming up
Improper original is set
Original is not set.
There is no copy paper that is in
the same direction as the
original.
Improper paper size is set.
The number of copies exceeds
the maximum copy quantity.
----------------------
Problem/Cause
The machine is in Energy Saver
mode.
The operation switch is turned
off.
The main power switch is
turned off
The Main Power switch is
turned off.
The power cord is unplugged.
Action
Wait for the machine to warm
up.
Set non-standard size original
on the exposure glass
Input the horizontal and vertical
size of the custom original.
Select paper manually, not in
Auto Paper Select mode.
Do not use Auto Reduce/
Enlarge mode.
Set your originals.
Set the original in the same
direction as the copy paper.
Select proper paper size.
You can change the maximum
copy quantity that you can
make at a time.
Set the key counter.
Action
Turn on the operation switch.
Turn the Main Power switch on.
Plug the power cord in securely.
Service and Supplies