Lanier 5515 Operator's Manual page 53

Menu
10. Auto Tray Switch (for
copy mode only)
11. Print Priority (setting the
multi-accessing function)
12. Display Contrast
13. Paper Status
14. Key Op. Tools
1 Show Counter
2 Print Counter
3 Key Op. Access
4 Prog. Key Op. Code
User Tools Settings
Description
If you load paper of the same size in two or more trays, the
machine automatically shifts another tray when the tray in
use runs out of paper. You can set or cancel this setting.
If you put special paper in paper trays using the Special
Paper Indicate menu, the Auto Tray Switch function is
available to these trays only when their settings are
identical.
Default: On
Sets the print priority for each mode.
• "Display"
Print priority is given to the mode displayed on the
display.
• "Copier"
Print priority is given to the copy function.
• "Fax"
Print priority is given to the fax function.
• "Printer"
Print priority is given to the printer function.
• "Interleave"
Prints jobs in the order in which they are initiated
regardless of mode/function.
Output from each function might be mixed. If you want to
avoid such mixing, specify an independent tray for each
feature using "Output Tray Prio.". When using different
functions, attaching internal tray 2 allows you to specify an
independent tray for each function. If you want to attach
one, contact your local dealer.
Default: Copier
You can adjust the brightness of the panel display.
You can select the condition of the paper (Normal or Dry).
Use to view or print counter and set up user codes.
System Settings
5 - 5