Table of Contents
Advertisement
5.
Click
. The program extracts the firmware files and places them in a folder
Next
identified in the InstallShield Wizard window.
NOTE: Note the folder to which the firmware file is saved.
6.
Click
to exit the program.
Finish
7.
Connect a computer that runs the Windows operating system to either the RS-232 port
or the Configuration port of the switcher (see
for more details).
8.
Start the Universal Switcher Control Program and connect to the front panel
Configuration (USB) port on the switcher (see
9.
Click
>
Tools
Update firmware
Firmware Loader appears (see figure 16).
10
Figure 16.
Extron Firmware Loader Window
10.
Select the FOX SW8 and click
(see figure 17).
Figure 17.
Choose Firmware File Window
11.
Navigate to and select the new firmware file. Click
window closes.
ATTENTION:
The firmware file must have an .S19 extension. Other file types can
cause the switcher to stop functioning.
Installation and Operation
Starting the
or the Update Firmware button ( ). The Extron
>
. The Choose Firmware File screen appears
File
Open
11
11
Open
on page 4
program, on page 13).
. The Choose Firmware File
FOX SW8 • Remote Control
17
Advertisement
Table of Contents
