Figure 21-6 Menu 24.3 - System Maintenance - Log And Trace; Figure 21-7 Examples Of Error And Information Messages - ZyXEL Communications ZyWall 100 User Manual

ZyWALL 100 Internet Security Gateway
Figure 21-6 Menu 24.3 — System Maintenance — Log and Trace
Examples of typical error and information messages are presented in the following figure.
0 Wed Aug 22 21:23:26 2001 PP17
1 Wed Aug 22 21:23:26 2001 PP17
2 Wed Aug 22 21:23:54 2001 PINI
3 Wed Aug 22 21:24:26 2001 PP0d
4 Wed Aug 22 21:24:26 2001 PP17
5 Wed Aug 22 21:24:26 2001 PP0d
6 Wed Aug 22 21:24:26 2001 PP17
7 Wed Aug 22 21:24:26 2001 PP17
8 Wed Aug 22 21:24:26 2001 PP17
10 Thu Aug 23 08:26:59 2001 PINI -WARN
11 Thu Aug 23 08:26:59 2001 PINI
12 Thu Aug 23 08:27:04 2001 PP17
13 Thu Aug 23 08:27:28 2001 PINI
14 Thu Aug 23 08:27:40 2001 PINI
15 Thu Aug 23 08:27:41 2001 PP0d
16 Thu Aug 23 08:32:40 2001 PINI
17 Thu Aug 23 08:33:07 2001 PINI
18 Thu Aug 23 09:01:12 2001 PINI
19 Thu Aug 23 09:02:09 2001 PINI
Clear Error Log (y/n):

Figure 21-7 Examples of Error and Information Messages

21.3.2 UNIX Syslog
The ZyWALL uses the UNIX syslog facility to log the CDR (Call Detail Record) and system messages to
a syslog server. Syslog and accounting can be configured in Menu 24.3.2 - System Maintenance - Unix
Syslog, as shown next.
21-6
Menu 24.3 - System Maintenance - Log and Trace
1. View Error Log
2. UNIX Syslog
4. Call-Triggering Packet
Please enter selection
INFO getDateTime fail: no server available
INFO adjtime task pause 60 seconds
INFO SMT Session Begin
INFO No DNS server available
WARN Wrong domain name
INFO No DNS server available
INFO Last errorlog repeat 8 Times
INFO getDateTime fail: no server available
INFO adjtime task pause 1 day
SNMP TRAP 0: cold start
INFO main: init completed
INFO adjtime task pause 1 day
INFO SMT Session Begin
WARN system name is not configured
INFO LAN promiscuous mode <0>
INFO SMT Session End
INFO SMT Session Begin
INFO SMT Session End
INFO SMT Session Begin
System Information and Diagnosis