Figure 21-2 Menu 24.1 - System Maintenance - Status; Table 21-1 System Maintenance - Status Menu Fields - ZyXEL Communications ZyWall 100 User Manual

ZyWALL 100 Internet Security Gateway
Step 2. In this menu, enter 1 to open System Maintenance - Status.
Step 3. There are three commands in Menu 24.1 - System Maintenance - Status. Entering 1 drops the
WAN connection, 9 resets the counters and [ESC] takes you back to the previous screen.
Port Status
WAN Down
LAN Down
DMZ Down
Port Ethernet Address
WAN 00:a0:c5:01:23:46
LAN 00:a0:c5:01:23:45
DMZ 00:a0:c5:01:23:47
System up Time:
Figure 21-2 Menu 24.1 — System Maintenance — Status
The following table describes the fields present in Menu 24.1 - System Maintenance - Status. These fields
are READ-ONLY and meant for diagnostic purposes. The upper right corner of the screen shows the time
and date according to the format you set in menu 24.10.
FIELD
Port
Status
TxPkts
RxPkts
Cols
21-2
Menu 24.1 - System Maintenance - Status
TxPkts
0
463
0
IP Address
192.168.1.1
3:06:20
COMMANDS: 1-Drop WAN 9-Reset Counters
Table 21-1 System Maintenance — Status Menu Fields
Identifies a port (WAN, LAN or DMZ ) on the ZyWALL.
Shows the port speed and duplex setting if you're using Ethernet Encapsulation
and Down (line is down), idle (line (ppp) idle), dial (starting to trigger a call) and
drop (dropping a call) if you're using PPPoE Encapsulation.
The number of transmitted packets on this port.
The number of received packets on this port.
The number of collisions on this port.
RxPkts Cols Tx B/s
0 0
792 0
0 0
IP Mask
0.0.0.0 0.0.0.0
255.255.255.0
0.0.0.0 0.0.0.0
Press Command:
DESCRIPTION
03:06:17
Sat. Jan. 01, 2000
Rx B/s Up Time
0 0 0:00:00
0 0 0:00:00
0 0 0:00:00
DHCP
Client
Server
None
ESC-Exit
System Information and Diagnosis