This chapter shows you how to configure a remote node for a dial-backup connection.
10.1 Remote Node Profile (Backup ISP)
Enter 2 in Menu 11 Remote Node Setup to open Menu 11.1 Remote Node Profile (Backup ISP) (shown
below) and configure the setup for your Dial Backup port connection.
Rem Node Name= ?
Active= Yes
Outgoing:
My Login=
My Password= ********
Authen= CHAP/PAP
Pri Phone #= ?
Sec Phone #=
Figure 10-1 Menu 11.1 Remote Node Profile (Backup ISP)
Table 10-1 Fields in Menu 11.1 Remote Node Profile (Backup ISP)
FIELD
Rem Node
Enter a descriptive name for the remote node. This field can be up to
Name
eight characters.
Press [SPACE BAR] and then [ENTER] to select Yes to enable the
Active
remote node or No to disable the remote node.
Backup Remote Node Setup
Backup Remote Node Setup
Menu 11.1 - Remote Node Profile (Backup ISP)
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
ZyWALL 100 Internet Security Gateway
Edit PPP Options= No
Rem IP Addr= 0.0.0.0
Edit IP= No
Edit Script Options= No
Telco Option:
Allocated Budget(min)= 0
Period(hr)= 0
Nailed-Up Connection= No
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= 100
Chapter 10
EXAMPLE
LAoffice
Yes
10-1