At+Cbst - Select Bearer Service Type - Siemens M1 User Manual

Technical reference section

AT+CBST - Select bearer service type

This command selects the bearer service with data rate and the connection element
to be used when data calls are originated.
Command
AT+CBST=[<speed>
[,<name>[,<ce>]]]
AT+CBST?
AT+CBST=?
0
4
6
7
68
70
71
0
0
50
AT+CBST
Result
Selects new speed, name and ce
Displays speed, name and ce
Displays list of supported speed, list of supported
name and list of supported ce (Connection Ele-
ments)
<speed n>
autobauding
2400 bps (V.22bis)
4800 bps (V.32)
9600 bps (V.32)
2400 bps (V.110)
4800 bps (V.110)
9600 bps (V.110)
<name n>
asynchronous modem
<ce n>
transparent
n=[0,4,6,7 ,68,70,71]
n=[0]
n=[0]