Lexmark 248X-200 series Service Manual page 71

24XX-200
8. Turn the printer upside down.
9. Insert a flat blade screwdriver into each of the four holes (B) in
the bottom cover, releasing the top cover from the bottom
cover.
10.Turn the printer right side up and insert a flat blade screwdriver
into each of the two holes (C) in the back of the top cover.
11. Lift the top cover up and over the print unit assembly.
Note: When replacing the top cover, be sure the operator panel
cable is correctly aligned and inserted securely into the logic board.
Damage to the operator panel cable may cause failure of other
electrical components in the printer.
B
C
Repair information
4-9