Table of Contents
Advertisement
24XX-200
LED
Power
Ready
Paper Out
Panel Lock
Font Lock
Power
Ready
Tractor 2
Paper Out
Font Lock
Power
Ready
Tractor 2
Paper Out
Font Lock
Status
Alarm
ON
Beeps
Blinking
10
Blinking
times
Blinking
Blinking
None
ON
None
Blinking
Blinking
Blinking
Blinking
ON
None
Blinking
Blinking
Blinking
Blinking
Action
Home Position Error
Go to
"Carrier service check"
on page
2-16.
Tractor 2 Home Position Error
If Tractor 2 is installed, remove it
to determine whether the problem
is with the Carrier Home Position
sensor or the Tractor 2 Home
Position sensor. See the
"Tractor 2 service check" on
page
2-34.
Home Position Error Without
Alarm
Go to
"Power service check"
on page
2-28.
Timer Error
Turn the printer off and then back
on. If you get the same error
during power-up, replace the logic
board and readjust the
bidirectional print adjustment.
Go to
"Bidirectional print
adjustment" on page
Hardware Drive Error
The printhead or the printhead
cable(s) can cause this error. Go
to
"Printhead service check"
on page
2-30.
Turn the printer off and then back
on. If you get the same error,
replace the logic board and
readjust the bidirectional print
adjustment. Go to
print adjustment" on page
If the printer completes POST
successfully and eventually gets
the same error, go to
"Intermittent problem service
check" on page
Diagnostic information
4-4.
"Bidirectional
4-4.
2-18.
2-3
Advertisement
Table of Contents
