Lexmark 248X-200 series Service Manual page 26

24XX-200
Symptom
The Load/Unload
button does not
function when the
push tractor is
installed.
Form feed length is
not correct.
The Load/Unload
button functions
when cut sheets are
being used.
Continuous forms
feed, but cut sheets
fail to load.
The Load/Unload
button functions
when the pull tractor
is installed.
The Paper Out lights
blinks and the
FormFeed button
does not operate
until paper is located
at first print line.
2-8
Service Manual
Action
Be sure the Paper Select lever is in the correct
position.
Go to "Paper Select sensor service check" on
page 2-26.
Be sure the Paper Select lever is in the cut sheet
position.
Verify that continuous forms have been parked
using the Load/Unload button.
Be sure Auto Cut Sheet is enabled in the Setup
mode.
Go to "Paper Select sensor service check" on
page 2-26.
Be sure the Paper Select lever is in the tractor
position.
Go to "Pull Tractor sensor service check" on
page 2-32.