Table of Contents
Advertisement
398
4-5. Using the driving support systems
The Blind Spot Monitor function
The Blind Spot Monitor function uses radar sensors to detect vehicles that are
traveling in an adjacent lane in the area that is not reflected in the outside rear
view mirror (the blind spot), and advises the driver of the vehicles existence via
the outside rear view mirror indicator.
The Blind Spot Monitor function detection areas
The areas that vehicles can be detected in are outlined below.
The range of the detection area
extends to:
Approximately 3.5 m (11.5 ft.) from
1
the side of the vehicle
The first 0.5 m (1.6 ft.) from the side of
the vehicle is not in the detection area
Approximately 3 m (9.8 ft.) from the
2
rear bumper
Approximately 1 m (3.3 ft.) forward
3
of the rear bumper
GX460_OM_OM60R28E_(GE)
Advertisement
Table of Contents
