Table of Contents
Advertisement
10. Replace the inner cover by holding the front cover horizontal and inserting
11. Replace the screws.
12. Close the front cover.
13. Replace the document support for scanned documents into the unit.
14. Plug in the MultiPASS L90 and make sure it is working properly. (Qp. 2-18)
15. Print the User's Data List as described on page 8-8, and check the memory
C-10
Options
the tabs on the inner cover into the slots on the unit.
amount. The "TOTAL FAX MEMORY" item should say "2.156 MByte".
Appendix C
Advertisement
Table of Contents
