Table of Contents
Advertisement
Message
DOCUMENT TOO LONG
ECM RX
ECM TX
FACE UP PRINT OUT
ERASING END
HANG UP PHONE
INSTALL CARTRIDGE
MEMORY FULL
MEMORY FULL
PLEASE WAIT
MEMORY IN USE nn%
NO ANSWER
NO PAPER IN MAN TRAY
10-16
Frequently Asked Questions
Error#
Meaning
#003
The document is longer than 1 m.
–
The unit is receiving a fax using
ECM.
–
The unit is sending a fax using
ECM.
–
The paper delivery selector is set
to face-up delivery.
#995
The document was deleted from
the memory.
–
The optional handset or the
extension telephone is off the
hook.
–
The toner cartridge is not installed.
#037
The unit's memory is full because
it has received too many
documents or a very detailed
document.
–
The unit's memory is full because
you tried to send too many pages
at once.
–
The unit is sending a fax from
memory and its memory is full.
–
Shows the percentage of memory
currently in use.
#005
The receiving fax machine does
not answer.
–
There is no print media in the
manual feed tray.
Solutions
Use a copy machine to make a reduced
copy of the document. Then send again.
ECM transmissions may take longer than
normal transmissions. Try turning it off if
you need to receive quickly, or if you
know your local phone lines are in good
condition.
ECM transmissions may take longer than
normal transmissions. Try turning it off if
you need to transmit quickly, or if you
know your local phone lines are in good
condition.
Proceed with manual feeding. For all
other operations, refer to page 7-8 to
select face-down delivery.
–
Make sure the handset is set properly in
its cradle.
Install the cartridge, making sure it is all
the way in. See page 2-20 for replacing
the toner cartridge.
Print out any documents that are stored
in memory. Then start the operation
again.
If the memory contains any faxes you
don't need, delete them.
You can not receive a fax in memory if
the fax was scanned with fine graphic
images.
Divide the document and send each part
separately.
Turn Auto Halftone OFF. (Qp. 4-14)
Cancel printing from your computer and
try printing less pages at a time.
Wait until the fax is sent. The unit
continues to send the fax as memory
becomes available.
If you need more space, print and check
the memory list, then clear any
unnecessary documents.
Make sure you dialled the correct
number. Try again later.
Insert the next sheet or envelope in the
manual feed tray. (Q p.7-11)
Chapter 10
Advertisement
Table of Contents
