Table of Contents
Advertisement
5. Connect the handset cord to the input jack marked
When carrying the unit, do not lift it by the handset cradle as it may break.
If you need to remove the handset cradle after it is installed, use a small phillips
screwdriver to unscrew the two screws.
C-4
Options
If you can't push the screws in with your finger, use a phillips screwdriver to
push them in. (Do not screw them in as the screws may break.)
Make sure the screws are inserted all the way into the plugs.
unit.
on the left side of the
Appendix C
Advertisement
Table of Contents
