Master Effects; Effects Mode; Effects Multi Mode Control - E-Mu XK6Xtreme Keys Owner's Manual

Master Effects

Effects Mode

Effects Multi Mode
Control
88 E-MU Systems
The digital effect processors can be programmed as part of the preset (using
the Preset Edit menu) so that effects will change along with the preset.
However, there are only two effect processors, and so you cannot have a
different effect on each preset when in Multi mode.
The Master Effects settings assign the effect processors "globally" for all
presets to provide a way to use the effects in Multi mode. Detailed infor-
mation is presented in the Effects chapter (see Effects on page 173).
The FX Mode page enables or bypasses the effects. When the FX Mode is set
to "bypass," the effects are turned off on a global scale. This includes Effects
programmed in the preset.
FX MODE
enabled
The routing scheme for the two stereo effects processors provides a lot of
versatility. When in multi mode, you can "use master settings" which
applies the Master effects settings to all 16 MIDI channels.
FX MULTIMODE CONTROL
use master settings
If you want more control, you can use the "channel" setting which applies
the effects settings of the preset on a specified channel to all the other
channels. Changing the preset on the specified channel changes the effect.
FX MULTIMODE CONTROL
preset on channel 1
If you are in Omni or Poly modes this parameter is disabled and the
message in parentheses explains that XK-6 is currently in Omni mode.
FX MULTIMODE CONTROL
(using Omni mode)
Global Menu
Master Effects