Effects Mode; Flexible Effects Control - E-Mu XK6Xtreme Keys Owner's Manual

Effects Mode

Flexible Effects
Control
   
You can create special
"Effects Presets" which are
assigned to the FX Multi mode
Control channel, then use
standard MIDI Program Change
commands to switch effects
during sequence playback.
180 E-MU Systems
This control provides a true bypass of the effects engine. Bypass is a useful
feature if you are using external effects at the mixing console and want to
turn the effects off for all presets.
To Bypass the Effects:
Press the Global menu button. The LED lights and the last Global
1.
parameter screen used is displayed.
Use the data entry control to select the Effects Mode screen.
2.
FX MODE
enabled
Use the cursor button to advance the cursor to the bottom line in the
3.
screen.
Use the data entry control to change the value.
4.
Press the Enter key to save the settings.
5.
The Effects Mode values are "enabled" and "bypassed." Enabling the Effects
Mode turns on effects. Selecting "bypassed" turns off the effects.
The effects processor controls are very flexible. The effects can be controlled
in three different ways to suit your personal preference and to adapt to
different situations.
When in Omni or Poly mode, effects are normally programmed as part of
the preset. In Multi mode, the two effects processors can be controlled
using the Master settings or by using the effects settings of a preset on a
specific MIDI channel. Effects can be programmed in the following ways:
Programmed as part of the preset when playing single presets
1.
(Omni or Poly Modes).
Programmed from the Master Effects Section when playing
2.
either single presets (preset Effect Type set to "Master") or
when in Multi Mode.
Programmed from the designated control preset when in Multi
3.
Mode.
Effects
Master Effects