Modulation Destinations - E-Mu XK6Xtreme Keys Owner's Manual

Modulation
Destinations
   
All the modulation
destinations are summing
nodes. This means that you can
connect as many modulation
sources as you want to a
destination. Modulation sources
are simply added algebraically
— connecting two sources, one
with a value of -100 and the
other with a value of +100 yields
a net value of zero.
108 E-MU Systems
The PatchCords section of the Preset Edit menu is where you connect
sources to destinations. Each PatchCord has an amount associated with it
which controls how much modulation is applied.
L1
PATCHCORD
ModWhl -> RTXfade
The PatchCords screen above and the diagram below show how
modulation sources are connected to destinations. The modulation sources
can control any of the destinations in the layer.
Instrument
Mod
LFOs
Wheel
• Note-on modulation sources, such as key, velocity and gate output a
single value at note-on time. Realtime modulation sources such as
LFOs, envelope generators and modulation wheels output
continuously changing values.
The possible modulation routings are completely flexible as shown in the
diagram above. Multiple sources can control the same destination, or a
single source can control multiple destinations.
Layer
Z-Plane
Filter
Freq. Gain
Envelope
Gen.
Envelope
MIDI
Controls
Gen.
Programming Basics

Modulation Destinations

#01
+036
L
Amp
R
Pan
Vol
Envelope
Gen.
Key #
Mod.
Velocity
Proc.
Gate