Beats Keys Offset; Beats Part Velocity - E-Mu XK6Xtreme Keys Owner's Manual

Arp/Beats Menu

Beats Keys Offset

Beats Keys Offset

Beats Part Velocity

52 E-MU Systems
This function slides the Beats Trigger keys (assigned in the previous screen) up
and down the keyboard. This makes it easy to change the keyboard location
of the trigger keys without having to re-assign each key. A positive offset
moves the group of triggers up the keyboard by the designated number of
keys. Negative offsets move the trigger group lower on the keyboard.
BEATS KEYS OFFSET
+000 keys
Negative Offset
Beats Keys Offset slides the entire group of beats triggers up or down the keyboard.
Each note of a Beats Riff can have its recorded velocity scaled by a value
(from 0 to 120%) of the recorded velocity or the actual played velocity of
the trigger key can be used (trigger vel). For example, if a note's velocity is
80, scaling by 110% will increase the note's velocity to 88. This feature
allows you to control the mix of the different parts in advance or "on-the-
fly" as you play. If a part's velocity is set to 0%, that part will be removed
from the mix.
Select Part
P1
BEATS PART VELOCITY
Scaled by: trigger vel
To Set the Velocity for each Part:
Press the left cursor button to move the cursor under the Part field.
1.
Select the Part number using the Data Entry Control. Parts 1-16 can be
2.
selected. (All parts, shown as an "A", can be edited at once if "Edit All
Layers" is enabled in the Master menu.)
Move the cursor to the bottom line using the cursor keys and adjust the
3.
Velocity Scaling percentage using the Data Entry Control.
Repeat steps 1 through 3 for all the Parts you wish to adjust.
4.
Press the Enter/Home button or use the cursor keys to move the cursor
5.
back to the screen heading.
Positive Offset
Trigger
Keys