Pitchbend Range; Mix Output - E-Mu XK6Xtreme Keys Owner's Manual

Pitch Bend Range

Mix Output

160 E-MU Systems
Specifies the Pitch Wheel range in semitones for the current layer. Pitch
Wheel is a standard synthesizer control which is transmitted as a MIDI
continuous controller message used (normally) to bend the pitch up and
down.
The PitchBend range is from 0 to +12 semitones or "Master." A setting of
"0" turns the pitch wheel Off for the current layer. The Master setting uses
the Pitch Bend range defined in the Global menu.
L1

PITCHBEND RANGE

+/- 12 semitones
This feature allows you to program the Effect Send as a part of the preset.
Note that for this feature to work, the Mix Output setting in the Global
menu MUST be set to "Preset" on the selected MIDI channel. If you want to
define output routing by MIDI channel, set it up using the Mix Output page
in the Global menu. See "Mix Output" on page 86 for more information.
L1
MIX OUTPUT
Send2->main
FX Send
Routing
The Sends function as effect processor inputs (effect sends). The Output
Routing field shows the true routing of the Sends to the Main output.
To Control the Mix Output from the Preset:
Move the cursor until it is underneath the Layer field and change the
1.
Layer using the data entry control.
Move the cursor until it is underneath the FX Send Routing field and
2.
change the Send (1-4) using the data entry control.
Locate the MIX OUTPUT screen in the Global menu.
3.
Set the MIDI channel you are using to "use preset".
4.
Output
Routing
Preset Edit Menu
Pitch Bend Range