Receive Program Change; Midi Program Change -> Preset - E-Mu XK6Xtreme Keys Owner's Manual

Receive Program
Change
MIDI Program
Change -> Preset
   
The Program->Preset
Change only works for program
changes received in Bank 0.
Because the MIDI Enable function only makes sense if you are in Multi
mode, XK-6 disables this feature when in Omni or Poly mode.
MIDI ENABLE
In Multi
Mode
channel 16: On
In Omni
MIDI ENABLE
Mode
(using Omni mode)
Use this function to instruct XK-6 to utilize or ignore incoming MIDI preset
changes or Bank Select commands for each channel. Use the cursor buttons
to select the channel number field, then use the data entry control to select
a channel number. Use the cursor button again to select the On/Off field
and the data entry control to change the value.

RECEIVE PROGRAM CHANGE

channel 01 : on
You can also remap incoming MIDI program changes to a different
numbered preset. This is a handy feature when your master keyboard
cannot send a bank change or you want to reorder preset numbers. Any
preset can be mapped to any incoming MIDI program change number.
For example, you could set up the Program -> Preset map to call up preset
#12 whenever XK-6 receives MIDI program change #26.
The four fields shown below are editable.
MIDI PROG CHNG
Incoming Program
Change in Bank 0
-> PRESET
000 User
ROM Bank
Program No.
MIDI Menu
Receive Program Change
0
000
Bank No.
XK-6 Owners Manual 95