Cancelling "Scan The Load; Skipping "Scan The Load; Accept Scanned Loads - Miele PG 8527 Operating Instructions Manual

Barcode scanner (optional)

Cancelling "Scan the load"

Skipping "Scan the load"

Closing "Scan the load"

Accept scanned loads

56
Providing a load has not been scanned, scan the load can be
cancelled by pressing the +C button. The programme
overview will appear in the display again.
If loads have already been scanned, these must be deleted
before cancelling. To do this, for each scanned load answer
Delete last entry?
the question
In operating levels B and D, Scan the load can be skipped by
pressing the OK button.
Skip load scan?
If the question
programme overview appears in the display.
If the question is answered with
started again by pressing the h button.
"Load scan skipped" will be printed at the end of the wash
report.
^ After all of the barcodes on a load have been scanned,
close the process by pressing OK.
The h button will flash and the programme can be started.
When "Scan the load" is activated, the Profitronics check
before the programme starts that at least one scanned load
has been saved to memory.
Yes
with .
is answered with
Yes
, the programme can be
No
, the