Switch Heating Method; Current Faults; Load Items - Miele PG 8527 Operating Instructions Manual

Context menu

Switch heating method

Current faults

Load items

26
On convertible washer-disinfectors, the heating method can
be switched, e.g. from electric to steam heating, via the
context menu.
^ Selelct the
Steam/Electric
^ Change the heating method setting to the one you require,
Steam+electric
e.g.
The changed heating method is now saved to memory.
^ Press +C to come out of the context menu.
The current fault messages can be called up in operator level
D under this menu option.
^ Select the option and confirm your selection with OK.
Any faults which are present at the moment will be displayed.
^ Use OK to change between the fault messages.
^ Press +C to come out of the context menu.
If a barcode scanner has been connected to the
washer-disinfector and the load scan is activated, scanned
loads can be listed in the context menu under this option.
All of the procedures in connection with the barcode scanner
are described in the section "Barcode scanner".
option and activate it with OK.
and confirm your selection with OK.