Interrupting A Programme - Miele PG 8527 Operating Instructions Manual

Operation

Interrupting a programme

A programme can only be
interrupted in operating level B or D.
If you absolutely have to open the door,
e.g. because the load is obviously
unstable or to check the cleaning
performance (conscious intervention):
After interrupting a programme with
defined process requirements, if you
wish to continue it, please check the
message in the display at the end of
the programme. If the message
Process parameters not achieved
appears, it means that the door was
opened after the process parameter
monitoring had begun and so the
defined process requirements were
not fulfilled. If necessary, the
programme must be repeated.
In operating levels B or D
^ Press button +C.
The programme will be interrupted.
The following query will appear:
Cancel programme (OK)
or continue (Clear)?
^ Open door with a.
50
Important PG 8528:
The door which can be opened will
depend on what setting has been
programmed under Machine
functions / Automatic door (see the
Programming manual).
The door on the unclean can be
opened whatever the parameter set.
The door on the clean side can only be
opened if one of the following
parameters has been set:
- Interlock,
- Door clean + Interlock,
- Door unclean + Interlock.
,
Caution. Water and items in the
machine may be hot. Danger of
burning or scalding.
Where a chemo-thermal disinfection
programme has been used, be
aware that steam may contain high
quantites of disinfecting agent.
^ Rearrange the load. Follow infection
control regulations and wear
protective gloves.
^ Close the door with a
^ Press button +C.
The programme will continue.