Programme Sequence; At The End Of A Programme; Switching Off; Cancelling A Programme - Miele PG 8527 Operating Instructions Manual

Programme sequence

The programme will start automatically
as soon as the Start button has been
pressed.
The programme stage reached will be
shown in the display as the programme
proceeds.
Detailed information on programme
sequences is given in the
Programming manual.
,
On machines with a built-in
printer you must not change the
ribbon or the paper roll whilst a
programme is in progress.

At the end of a programme

^
Programme finished
the display at the end of a
programme.

Switching off

^ Press button s.
If the machine is not going to be
used for several days, the master
switch should be set to 0 OFF.
will appear in

Cancelling a programme

A programme can only be cancelled
in operating level B or D.
In operating levels B or D
^ Press button +C.
The programme will be interrupted.
The following query will appear:
Cancel programme (OK)
or continue (Clear)?
,
With established
decontamination programmes any
contaminated water must be
decontaminated using a disinfecting
agent before it is discharged into the
sewerage system. The door on the
unclean side of the machine can be
opened to do this.
^ Confirm the cancellation of the
programme with the OK button.
Programme cancelled
Water drainage
display.
After the water has been pumped
away, the display will show the list of
programmes again.
Operation
,
will appear in the
49